Candela VelaShape, Инструкция по эксплуатации, Страница: 44 / 60

Copyright 2020 Product Guide. All Rights Reseved
Treatment Parameters
Selecting the correct treatment parameters is essential for safe and successful treatment.
• Set the IR mode intensity level according to the vacuum level, so that you do not exceed
a total of 5, e.g. with vacuum level 2 you may use IR level 3, but with vacuum level 3 use
IR level 1 or 2.
• Do not use high IR levels for very dark or tanned skin, or over hair.
• Reduce IR level when the skin surface is rapidly heated such as in stacking, in particular
with the Vcontour applicator.
• Vacuum levels for sensitive areas, such as inner thigh and over loose skin areas, should
rarely exceed level 1 and may only be increased according to the patient's tolerance.
• Use high RF levels unless the patient feels an intolerable "stinging" sensation.
• Low IR levels with higher vacuum levels enable prolonged and deeper treatment (e.g.
circumference reduction). Higher IR levels with lower vacuum levels facilitate overall
smoother appearance of the skin surface (via cellulite reduction).
• When using the Vcontour applicator, stacking is the preferred treatment manner. The
typical number of stacked pulses is up to 10.
Table 3:Treatment Parameters for Vsmooth & Vcontour Applicators
DESIRED TREATMENT
Cellulite Treatment
[Superficial Hypodermis]
2 - 3
3
1 - 2
IR LEVEL
RF LEVEL
VACUUM LEVEL*
Circumference Reduction/
Body Contouring [Deep
Hypodermis]
(*) Vacuum may be lowered in accordance with the patient's tolerance.
►
NOTE
• The treatment parameters in Table 3 are typical but always consider
individual skin response and patient's comfort.
• Always start with a test spot, treat and increase levels gradually if the
patient's skin response and comfort allow.
1
3
2 - 3 *