CANAM TECHNOLOGY, INC. (CTI)
MARK-IV UHF NARROWBAND SIGNAL BOOSTER
OPERATIONS & MAINTENANCE (O&M) MANUAL
Page 7 of 36
Rev0 June/2011
Section C.
SAFETY PRECAUTIONS
Ensure that All Operating and Maintenance Personnel do follow INDUSTRY
standard Safety Methods and Precautions. There are system-specific
precautions that must be enforced, such as:
Site Safety Policies
Equipment Handling and Installation
AC power feeds and Power Supply Converters
Multi-Carrier (High) Power Amplifier (MCPA) modules hot surfaces
RF Exposure
C.1
Equipment Handling and Installation
1.
The enclosure has a weight of 40 kg approximately.
C.2
Power Supplies
1.
When servicing the internal Power Supply and wiring unit, be aware
that power lines are in screw terminal blocks.
2.
CAUTION:
Removal and Installation requires that the main power
switch be in the OFF position, and the power cord be disconnected
from the enclosure.
C.3
MCPA Modules
1.
Internal MCPA modules are mounted to their corresponding heat
sinks and are used to dissipate DC power. Both the Heat Sink and the
MCPA module
MAY
be hot.
C.4
RF Exposure
The RF Field Strengths that an individual will be exposed to while doing
maintenance is well below the limits set forth by the FCC & State Laws.
