CANAM TECHNOLOGY, INC. (CTI)
MARK-IV UHF NARROWBAND SIGNAL BOOSTER
OPERATIONS & MAINTENANCE (O&M) MANUAL
Page 26 of 36
Rev0 June/2011
F.1.2 Connecting System to local area network
Use standard straight-thru cable for network switch/hub connection.
To connect system to LAN, it is necessary to know the subnet the PC
computer is currently plugged into.
If no network is available the user shall remain using the crossover
interconnection
Figure 11 – System connected into local area network.
Configure System IP address avoiding conflict with other devices IP
addresses.
o
First, it is necessary use procedure in previous section F.1.1.
o
Open a web browser and access the equipment by typing, in
the address bar, the IP address of the equipment.
Login with username = admin, password = admin.
