CANAM TECHNOLOGY, INC. (CTI)
MARK-IV UHF NARROWBAND SIGNAL BOOSTER
OPERATIONS & MAINTENANCE (O&M) MANUAL
Page 35 of 36
Rev0 June/2011
Figure 15 – Filter Settings page (2/2)
Filter Number
Read-only attribute. Processing slot number.
Filter Bandwidth (kHz)
Read-only attribute. The filter Bandwidth is
defined by the Filter Configuration.
Center Frequency (MHz)
Filter Center Frequency (MHz).
Rx Threshold (dBm)
Rx Squelch Level.
Hysteresis (dB)
Rx Squelch hysteresis.
Fine-Tune Output Level (dBc)
It is a fine-tuning control that provides 5 dB
range. It defines how many dB below of
Maximum Desired Output Level (defined in Main
Settings page) the particular signal will be.
CTCSS Tone
CTCSS Tone Frequency. In order to choose the
tone frequency, write one of the indexes shown
in pop up window when you pass the mouse
pointer over symbol.
CTCSS Tone Enable
CTCSS enable/disable.
Tx Enable
Transmitter ON/OFF.
AGC Enable
AGC ON/OFF.
