CANAM TECHNOLOGY, INC. (CTI)
MARK-IV UHF NARROWBAND SIGNAL BOOSTER
OPERATIONS & MAINTENANCE (O&M) MANUAL
Page 27 of 36
Rev0 June/2011
o
Go to the “Network Settings” page (see left-side menu) to
change the current settings to be assigned by the network
administrator.
IP Address, Network Mask, Gateway Address.
The controller requires a fixed address; it does not allow
DHCP settings.
Enter or press “Apply” button to apply the new
parameters, and then restart the system.
Now the system controller can be plugged into the local
area network served by your LAN Switch or Router.
