Canadiana 1695865, Руководство оператора

Страница: 17 / 296

17
FEATURES AND CONTROLS
SNOWTHROWER CONTROLS
A. Speed Select Lever — Allows the operator to use one of six (6)
forward and two (2) reverse speeds (see Figure 8). To shift, move
speed select lever to desired position.
NOTICE: Do not move speed select lever while Traction
Drive Clutch is engaged. This may result in severe damage
to drive system.
B. Auger Control Lever — Used to engage and disengage the auger
and impeller. To engage push down, to disengage release.
C. Chute Rotation Crank — Used to rotate the discharge chute to the
left or right.
D. Chute Deflector Wing Nut — Used to control the angle of the
chute deflector (up or down).
E. Traction Control Lever — Used to propel snowthrower forward or
reverse. Push down to engage, release to disengage.
F. Skid Shoe — Used to adjust ground clearance of auger housing.
G. Clean-Out Tool — Used to remove snow and debris from the
discharge chute and the auger housing.
Snowthrower Controls Figure 8
B
C
E
F
D
A
G