CANADIAN stove IDRO 20, Руководство пользователя

Страница: 101 / 447

45
EN
Maintenance and cleaning Thermostove with self-cleaning brazier
Parts Everyday
Every 2-3
days
Every
week
Every 15
days
Every 30
days
Every 60-
90 days
Every 1
year
Brazier
◊
Cleaning the ash collection
compartment with suction device
◊
Cleaning ash tray
◊
Exchanger (turbulators) ◊
Flame-shell
◊
Cleaning the interior heat
exchanger /
smoke fan compartment
•
Cleaning complete exchanger
•
Clean "T" to exhaust •
Flue
•
Door gasket ash
•
Internal parts
•
Flue pipe •
Circulation pump
•
Heat exchanger (where present)
•
Hydraulic components
•
Electromechanical components •
◊ by the user / • by the authorised qualifi ed technical assistance
All cleaning of all parts must be carried out with the Thermostove completely cold and
unplugged to avoid burns and thermal shock. The Thermostove does not need much
maintenance if used with certifi ed quality pellet. The need for maintenance varies
depending on the conditions of use (switching on and off repeatedly) and depending
on the performance required.
It is recommended periodic monitoring of the Thermostove to check its condition.
BY THE USER
Daily control
Cleaning exchanger - Thermostove off
Fouling act as insulation and the thicker they are, the lower the heat that is transmitted to the water and
to the structure generally. Therefore very important to perform the cleaning of the tube bundle, said
exchanger also, to prevent the fouling of the same and prevent clogging and jamming of the cleaning
device. Pull and push quickly for 5-6 times the lever so that the springs can remove the soot deposited
on the pipes.