CANADIAN stove IDRO 20, Руководство пользователя

Страница: 67 / 447

11
EN
It is recommended that the control of emissions after installation.
With obvious floor capacity evaluation, in the installation premises, a maximum can be deposited of
fuel, which corresponds to approx. 975kg of pellets.
In order to achieve the test report results, please load the performance parameters retained
by the manufacturer and the qualified tecnichian. They will use these parameters once
verified that, during the installation, it is possibile to reproduce the laboratory conditions.
This performance is only reached after 15/20 working hours at nominal power.
PARAMETER M. UNITS NSAT280 NSAT320
Heat input kW 27,34 32,41
Nominal heat output kW 25,86 30,48
Reduced heat output kW 8,57 8,57
Water heat output kW 20,35 24,38
Reduced water heat output kW 6,51 6,51
CO concentration at nominal reference (13% O
2
) mg/m 3 19,1 18,4
CO concentration at reduced reference (13% O
2
) mg/m
3
330,9 330,9
Nominal efficiency % 94,56 94,03
Reduced efficiency % 95,79 95,79
Pellet consumption (min-max) Kg/h 1,825 - 5,575 1,825 - 6,608
Heated surface mc 515 600
Flue gas flow rate (min-max) g/s 7,9 - 15,1 7,9 - 18,6
Draft (min-max) Pa 6 - 10 6 - 10
Flue gas temperature (min-max) °C 77,7 - 113,9 77,7 - 125,2
Thermostove water litri 60 60
DHW flow rate litres/minute 11,5 13,8
Maximum working pressure Bar 2,5 2,5
Tank capacity Kg 57 57
Smoke outlet tube mm 100 100
Diameter air intake mm 60 60
Connecting heating Inch 3/4 3/4
Connecting health Inch 1/2 1/2
Nominal voltage V 230 230
Nominal frequency Hz 50 50
Power consumption max W 400 400
Thermostove weight Kg 280 280
IEE 131 131
N° Test Report K 11962013T1
Ambiental decree n.186
Energetic class
A ++
Dust at 13% O
2
at nominal heat output mg/m 3 10,8 16,3