6
4. Insert bolts in rear anchor bracket (
B1-B2
) as
Fig. 4
CAUTION: Make sure that the bolt is inserted in the
right direction. See Fig. 5
Fig. 5
5. Remove bolt (
1
) that links lower rear suspension arm
to wheel hub. See Fig. 6
Fig. 6
6. Lift bracket (
B1
-
B2
) up to lower suspension arm.
Hook back end of bracket over front facing member of
suspension arm, as shown below in Fig. 7
Fig. 7
7. Pivot and slide bracket (
B1
-
B2
) back to align holes in
bracket with existing holes in suspension arm, as
shown below in Fig. 8
Fig. 8
8. Insert new M10x110 mm assembly bolt (
B3
)
through bracket, suspension arm and hub. Thread
new nut (
B4
) on bolt and tighten to 50 N•m of torque
[37 lb•ft]. See Fig. 9
Fig. 9
