5
TORQUE SPECIFICATIONS
Recommended torque specifications according to
bolt size and grade.
NOTE: Use a thread locker (Loctite 262 or equivalent)
at the specific points of the System indicated in
the
User Manual
’s exploded views.
INFORMATION
1. For most vehicles, directional arrows have been cut
out of some components in the anchor bracket kits.
Make sure the arrows point toward the front of the
vehicle when installing the brackets. See Fig. 1
Fig. 1
PREPARATION
1. Set each Track System unit near the position
indicated by the sticker affixed on the frame.
Fig. 2
** IMPORTANT
: Start by installing the REAR Track
Systems first. **
REAR TRACK SYSTEM INSTALLATION
1. Remove rear wheels. Make sure that wheel studs
and wheel hubs are free of dirt.
2. If needed, remove CV joint protectors.
3. Remove bolts, washers and spacer bushings from
rear stabilizing rod ends. See Fig. 3
Fig. 3
DIMENSION
GRADE
Nm
lb-
ft
Nm
lb-ft
M6-1.0
10
7
M8-1.25
25
18
33
24
M10-1.5
50
37
70
52
M12-1.75
90
66
125
92
FRONT
