CAMSO 30/36D23MC, Руководство по эксплуатации и обслуживанию

Страница: 36 / 48

CBP-436(2017) Operation and Maintenance Manual-CTS Tractors Camso | 12-17 | 36
6.8 Track Removal
1. Remove the Camso track
system following the
“Installation Instructions” in
inverted sequence if
necessary to remove the
complete undercarriage
and track from the
machine.
In many cases, the track
system is not required to be
removed from the machine
for track removal or
installation.
NOTE:
Procedure is shown with the 24D17C and 24D18C model CTS. The
procedure is the same with the 30/36D23MC and 30/36D22MC model CTS systems.
2. Loosen the nuts that
mount the idlers wheels
on the outer front and rear
idlers.
Note: In some cases, it
may be easier to remove
both the inner and outer
idlers to replace the track.
Removing both inner and
outer idler wheels allows
the track to be lifted off of
the sprocket/drive wheel
easier.
3. Release the tensioning
circuit pressure as
described in “Tensioning
circuit discharge/purge ”
paragraph of “Routine
maintenance” section.
Note: Clean out the area
behind the tensioning arm
prior to detensioning the
track. This will allow the
tensioning arm to retract
further, improving access
to remove and install the
track.