www.camplux.com
42
Visit Us: Camplux.com
3330-A Marathon Ct Charleston, SC 29418
(844) 538-7475
Replacement Parts And Drawing
Wind Switch
Motor Fan
Temp. Controller
Heat Exchanger
PCB Controller
Burner Assembly
Manifold
Gas Valve
Temperature Sensor
Water Flow Sensor
Water Inlet Pipe
Gas Inlet Pipe
Fixing Board
Back Cover
Maximum Input Rating (Btu per hour)
Minimum Input Rating (Btu per hour)
Minimum Input Gas pressure
Maximum Input Gas pressure
Manifold Pressure
Maximum Working Pressure
150 PSI
Serial No.
RESIDENTIAL TANKLESS WATER HEATER
CA318
82,000
120 Volts
60 Hz
Less than 12 Amperes
Amps
Recovery
Rating
Not recommended in excess of 2,000 ft. above sea level.
Category Ill Water Heater
Frequency
Voltage
28,700
6.0" w.c
(1.50Kpa)
8.0" w.c
(2.0Kpa)
7.0" w.c
(1.74Kpa)
Model No.
For customer service on this appliance contact:
FOR YOUR SAFETY
Do not store or use gasoline or other flammable vapors and liquids in the
vicinity of this or any other appliance
(844)538-7475
Gas Type
Only
As used in this standard, the quantity of water obtained by multiplying the
manufacturer's input rating in Btu per hour by the thermal efficiency and
dividing the product by 825 Btu per gallon. This is based on a 100°F temperature
rise, and a nominal specific heat for water of 8.25 Btu per gallon per degree F.
The unit must be installed on a fire retardant area, and must be away from all combustible materials.
Minimum clearances from combustible construction, 6 inches sides, 0 inches back and 12 inches top.
The temperature and pressure relief valve provided by the manufacturer shall be installed at the
time of installation of the heater in the location specified by the manufacturer. Local codes shall
gover installation of relief devices. For safe operation of the water heater, the relief valve must not
be removed or plugged.
This water heater requires a special venting system. Refer to the installation instructions for parts
list and method of installation.
Natural Gas
Liquid Propane
Maximum Input Rating (Btu per hour)
Minimum Input Rating (Btu per hour)
Minimum Input Gas pressure
Maximum Input Gas pressure
Manifold Pressure
Maximum Working Pressure
150 PSI
Serial No.
RESIDENTIAL TANKLESS WATER HEATER
CA318
82,000
120 Volts
60 Hz
Less than 12 Amperes
Amps
Recovery
Rating
Not recommended in excess of 2,000 ft. above sea level.
Category Ill Water Heater
Frequency
Voltage
28,700
9.8" w.c
(2.45Kpa)
12.4" w.c
(3.10Kpa)
11.0" w.c
( 2.75Kpa)
Model No.
For customer service on this appliance contact:
FOR YOUR SAFETY
Do not store or use gasoline or other flammable vapors and liquids in the
vicinity of this or any other appliance
(844)538-7475
Gas Type
Only
As used in this standard, the quantity of water obtained by multiplying the
manufacturer's input rating in Btu per hour by the thermal efficiency and
dividing the product by 825 Btu per gallon. This is based on a 100°F temperature
rise, and a nominal specific heat for water of 8.25 Btu per gallon per degree F.
The unit must be installed on a fire retardant area, and must be away from all combustible materials.
Minimum clearances from combustible construction, 6 inches sides, 0 inches back and 12 inches top.
The temperature and pressure relief valve provided by the manufacturer shall be installed at the
time of installation of the heater in the location specified by the manufacturer. Local codes shall
gover installation of relief devices. For safe operation of the water heater, the relief valve must not
be removed or plugged.
This water heater requires a special venting system. Refer to the installation instructions for parts
list and method of installation.