www.camplux.com
32
Visit Us: Camplux.com
3330-A Marathon Ct Charleston, SC 29418
(844) 538-7475
Installation check list
A. Water Heater Location
● Installed INDOORS.
● Close to area of mostly used outlet.
● Protected from freezing temperatures.
● Proper clearance from combustible surfaces observed.
● Sufficient fresh air supply for proper operation of water heater.
● Air supply free of corrosive elements and flammable vapors.
● Provisions made to protect area for water damage.
● Sufficient room to service heater.
● Combustible materials, such as clothing, cleaning materials, rags, etc. clear of
the heater and vent piping.
● Water heater is properly attached to the wall.
B. Water Supply
● Water supply has sufficient pressure.
● Air purged from water heater and piping.
● Water connections tight and free of leaks.
● Water filter is clean and in place.
● Materials used are as instructed in this manual.
● Water pipes are insulated.
C. Gas Supply
● Gas type matches rating plate.
● Gas supply pressure is sufficient for the water heater.
● Gas line equipped with shut-off valve, union and sediment trap.
● Approved pipe joint compound used.
● Commercial leak detector or soap and water solution used to check all
connections and fittings for possible gas leak.
● Gas company inspected installation (if required).
D. Relief Valve
● Pressure relief valve properly installed and discharge line run to open drain.
● Discharge line protected from freezing.
E. Electrical Wiring
● Voltage matches rating plate.
● Water heater is properly grounded.
● Wiring meets all local codes.
● GFCI protection where required.
