Campbell CR510, Руководство оператора

Страница: 48 / 264

SECTION 2. INTERNAL DATA STORAGE
2-4
another memory location may be entered,
followed by the "A" key to jump to the start of
the Output Array equal to or just ahead of the
location entered. Whenever a location number
is displayed by using the "#" key, the
corresponding data point can be displayed by
pressing the "C" key.
The same element in the next Output Array with
the same ID can be displayed by hitting #A.
The same element in the previous array can be
displayed by hitting #B. If the element is 1
(Array ID), then #A advances to the next array
and #B backs up to the previous array. #0A
backs up to the start of the current array.
The keyboard commands used in the
∗
7 Mode
are summarized in Table 2.3-1.
Advancing the DPTR past the Data Storage
Pointer (DSP) displays the oldest data point.
Upon entering the
∗
7 Mode, the oldest Output
Array can be accessed by pressing the "A" key.
TABLE 2.3-1.
∗∗∗∗
7 Mode Command Summary
Key Action
A
Advance to next data point
B
Back-up to previous data point
#
Display location number of currently
displayed data point value
C
Display value of current location
# A
Advance to same element in next
Output Array with same ID
# B
Back-up to same element in
previous Output Array with same ID
# 0 A
Back-up to the start of the current
Final Data Storage Array
∗
Exit
∗
7 Mode