![background image](http://html1.mh-extra.com/html/campbell/cr200/cr200_instruction-manual_489088038.webp)
Section 3. Overview
28
3.1.3.4
Power Terminals
Read More!
See
CR200(X) Power Supply
(p. 53).
Power In
•
Power Supply: External battery is connected to and Battery-
terminals. Review power requirements and power supply options in
CR200(X) Power Supply
(Appendix p.
30
)
before connecting power.
•
Input voltages in excess of 18 V may damage the CR200 and/or power
supply. Power to charge a 12 V lead-acid battery (16-22 VDC) must be
connected to the and Charge- terminals NOT to and
Battery-.
Power Out
•
Peripheral 12 V Power Source
: 1 terminal (SWBattery) and the associated
ground (G) supply power to sensors and peripheral devices requiring
nominal 12 VDC. Sensors and peripheral devices may also share a
connection to the and Battery- terminals which is the same as
connecting them directly to the battery. This supply may drop as low as 7
VDC before datalogger operation stops. Precautions should be taken to
minimize the occurrence of invalid data from underpowered sensors.
3.1.3.5
Communications Ports
Read More!
See
Telecommunications and Data Retrieval
(p. 131) and
PakBus
Overview
(p. 133).
The CR200(X) is equipped with an RS-232 communications port. This port
allows the CR200(X) to communicate with other computing devices, such as a
PC, or with other Campbell Scientific dataloggers.
Note
RS-232 communications normally operate well up to a transmission cable
capacitance of 2500 picofarads, or approximately 50 feet of commonly available
serial cable.
•
9-pin RS-232
: Non-isolated port for communicating with a PC through the
supplied serial cable, serial sensors, or through 3rd party serial
telecommunications devices. Acts as a DTE device with a null-modem
cable.
Read More!
See
APPENDIX. Serial Port Pin Outs
(Appendix p. 21).
Some versions of the CR200(X) include an optional spread spectrum radio for
wireless communication with other devices equipped with a spread spectrum
radio.
Содержание CR200
