3. In the Available Sensors and Devices box, type BaroVUE10 or find the sensor in the Sensors
> Meteorological > Barometric Pressure folder, and double-click BaroVUE10 (SDI-12)
Barometric Pressure Sensor. SDI-12 Address defaults to 0. Enter the correct SDI-12 Address
for the sensor if it has been changed from the factory default value. Type the elevation in
meters. Choose whether to measure the sensor every hour or every scan. The Barometric
pressure and Temperature default to hPa and deg C, respectively. These can be changed
by clicking the Barometric pressure or Temperature box and selecting another option.
4. Click the Wiring tab to see how the sensor is to be wired to the data logger. The default
control terminal for SDI-12 is C1. To change to another terminal, click the terminal name
and select another terminal. Click OK after wiring the sensor.
5. Repeat steps three and four for other sensors you want to measure. Click Next.
BaroVUE™10 Digital Barometer
5
