![background image](http://html1.mh-extra.com/html/campbell/barovue-10/barovue-10_product-manual_3797687044.webp)
11. To change the SDI-12 address, type aAb!, where a is the current address from the previous
step and b is the new address. Press Enter. The sensor changes its address and responds
with the new address. In the following example, the sensor address is changed from 0 to B.
12. To exit SDI-12 transparent mode, click Close Terminal.
NOTE:
The transparent mode for the CR6, CR3000, CR800-series, CR300-series, and CR1000 data
loggers is similar to that shown for the CR1000X.
B.3 References
SDI-12 Support Group. SDI-12: A Serial-Digital Interface Standard for Microprocessor-Based
Sensors – Version 1.4
. River Heights, UT: SDI-12 Support Group, 2017.
.
BaroVUE™10 Digital Barometer
41