Campbell BaroVUE 10, Руководство по эксплуатации продукта

Страница: 13 / 48

7.2 Programming
Short Cut is the best source for up-to-date programming code for Campbell Scientific data
loggers. If your data acquisition requirements are simple, you can probably create and maintain a
data logger program exclusively with
Short Cut . If your data acquisition needs are more complex,
the files that Short Cut creates are a great source for programming code to start a new program
or add to an existing custom program.
NOTE:
Short Cut cannot edit programs after they are imported and edited in CRBasic Editor .
A Short Cut tutorial is available in QuickStart (p. 4). If you wish to import Short Cut code into
CRBasic Editor to create or add to a customized program, follow the procedure in Importing
Short Cut code into CRBasic Editor (p. 33). Programming basics for CRBasic data loggers are
provided in the following sections. Downloadable example programs are available at
www.campbellsci.com/downloads/barovue10-example-programs .
7.2.1 SDI-12 programming
The SDI12Recorder() instruction sends a request to the sensor to make a measurement and
then retrieves the measurement from the sensor. See SDI-12 commands (p. 16) for more
information.
For most data loggers, the SDI12Recorder() instruction has the following syntax:
SDI12Recorder (Destination, SDIPort, SDIAddress, “SDICommand”, Multiplier, Offset,
FillNAN, WaitonTimeout)
For the
SDIAddress
, alphabetical characters need to be enclosed in quotes (for example,
“A”
).
Also enclose the
SDICommand
in quotes as shown. The
Destination
parameter must be an
array. The required number of values in the array depends on the command (see Table 8-2 (p.
17)).
FillNAN
and
WaitonTimeout
are optional parameters (refer to CRBasic Help for more
information).
7.2.2 RS-232 programming
The RS-232 instructions are shown in Table 7-3 (p. 11).
BaroVUE™10 Digital Barometer 10