Appendix C. Configuring the Raven for PPP
This will allow the data to be passed through the modem when connected to the
modem via PPP. If this change is not made any information coming through
will be trapped by the modem as it thinks the information is for itself.
After the changes have been made, click the
Write
icon to save the changes in
the modem
.
Click the
Reset
icon to restart the modem. The other ways to reset the modem
are by pressing the reset button on the front of the modem or removing the
power from the modem.
Click the
Disconnect
icon to terminate communications with the modem.
Datalogger Settings:
Using the Device Configuration Utility, configure the following setting on the
TCP/IP tab:
!
Config Port Used = RS232
!
IP Address = 0.0.0.0
!
Modem Dial String = PPP
!
Modem Dial Response = CONNECT
!
User Name and Password are blank
C-3
