Appendix A. ACE Manager Setup
without Template File
ACE Manager is used to program settings in the Raven EDGE modem to make
the modem compatible with CSI dataloggers. Airlink EDGE template files to
send the modems are available on our website
(
http://www.campbellsci.ca/download.html
). The procedure for sending the
template files is described in Section 5.
When the template files are not available, ACE Manager can be used to change
the settings described below.
For a direct connection on a COM port use PPP.
Make a note of the Device port (*DPORT). The default is 12345 and we use
6785 in our template. Any valid port can be used. This is the port number
used in LoggerNet to get to the datalogger.
A-1
