Raven EDGE GPRS/EDGE AirLink Cellular Modem
If the values are the same, the modem is not attempting to make a connection
with the datalogger. Check that the Raven EDGE template file has been
loaded.
If the “Host Serial Bytes Sent” increased, the modem attempted to connect to
the datalogger, but the response from the datalogger did not make it back to the
modem. Check the interface between the modem and the datalogger.
If both values incremented, the modem and the datalogger are communicating.
Try adding some extra response time in LoggerNet.
Baud rate changes require the modem to be reset before the
change takes affect. Click the Reset icon in ACE Manager to the
reset the modem and implement the change.
NOTE
FIGURE 7-1. ACE Manager status page showing communications
with modem.
17