Raven EDGE GPRS/EDGE AirLink Cellular Modem
After the template file has been loaded, and the APN entered, click the
Write
icon to save the changes in the modem
.
Click the
Reset
icon to restart the modem. The other ways to reset the modem
are by pressing the reset button on the front of the modem or removing the
power from the modem.
Click the
Disconnect
icon to terminate communications with the modem.
Unless you click the
Write
command, changes made in the New
Value field will not be sent to the modem. For some changes
(e.g., baud rate) you must also
Reset
the modem before the
changes will take effect.
NOTE
5.2 Dynamic IP Address
“Data Plan” accounts setup through Rogers are provided with a Dynamic IP
address. Dynamic IP addresses are granted only when the modem is connected
and can change each time the modem reconnects to the network.
Sierra Wireless/Airlink offers a free Dynamic DNS service that translates a
dynamic IP address to a fully qualified domain name, so that the modem can be
contacted by name as if it had a Static IP.
The domain name used in Loggernet is: xxx.eairlink.com, where xxx is the 10
digit phone number associated with the account and eairlink.com is Sierra
Wireless/Airlink DDNS server.
The following setting changes are required in the modem template.
10
