MW8 & MotionWare User Guide: Issue 1.2.1
Page 10
When the MotionWatch is connected for the first time, the
USB drivers will automatically be installed (see Section 2.4
Installing the USB Drivers).
Closing the MotionWatch Casing
The casing must be closed with the parts correctly aligned.
To aid with alignment, coloured indicators have been
provided as shown in the figure below:
With the indicators aligned, drop the top part of the casing
into the lower part and then turn
clockwise by
approximately 15 degrees
to close.
WARNING!
DO NOT ATTEMPT TO FORCE OPEN/CLOSED THE
MOTIONWATCH CASING WITHOUT TWISTING TO
UNLOCK/LOCK. DOING SO WILL DAMAGE THE
CASING AND INVALIDATE THE WARRANTY!
1.2 Indications For
Use
The MotionWatch is a compact, lightweight, body-worn
activity monitoring device that may be used to document
physical movement associated with applications in
physiological monitoring. The device is intended to monitor
limb or body movements during daily living and sleep. The
MotionWatch can be used to assess activity in any
instance where quantifiable analysis of physical motion is
desired.
1.3 Contraindications
The MotionWatch is indicated for use on healthy,
undamaged areas of skin. Where the patient has a history
of skin irritation, a device should be worn for a brief period
to test for skin irritation prior to commencing any recording.
Any device in close contact with the skin can trap sweat or
moisture and cause redness or slight skin irritation. If this
Alignment Indicators