Cameron NuFlo MC-II, Руководство пользователя

Страница: 26 / 47

MC-II Flow Analyzer
22
Set unit of measure for
RATE.
Factory default setting is bpd.
Deselect the
Pulse Output option.
Deselect the Password
Security option.
5. The upper display will show rAt.Eng , prompting you to enter the unit
of measure for the flow rate. Press INCREMENT repeatedly until “per
day” (PEr.dAY) appears in the lower display. Since the desired rate is
kiloliters per day, this is the appropriate rate setting for the user-de-
fined volume unit. Press
ENTER/STEP .
6. The upper display will show the prompt PULSE and the lower display
will show the factory default setting, OFF . If it shows a setting other
than OFF , press INCREMENT until OFF is shown since the pulse
output is to be disabled. Press
ENTER/STEP
. (See Appendices A and
B for information on configuring the pulse output feature.)
7. The upper display will show the prompt CodE and the lower display
will show
no
. Press
ENTER/STEP
to accept the factory default
no
setting, disabling the security code feature. If YES is displayed in the
lower display, press INCREMENT until no is shown. (See “Enable
Password Security Option,” page 11, for more information on security
settings. Press ENTER/STEP .