CAME Corsa Series, Руководство пользователя

Страница: 6 / 12

IP7
ELECTRICAL CABINET
C;;"'B
"
"
,-
"
.
"
.
"
,. B
"':n.
8
• B
u'"
8
~&
JJ~~
t~J##l
OPENKEY
TERMINAL BOARD FOR CONNECTION OF
MOTOR-ENCODER- BATIERY-POWER
SUPPLY 24V
SEAT FOR EMERGENCY OPERATION CARD
MA7032
DIP-SWITCHES
ADJUSTMENT TRIMMERS
CONNECTION FORFUNCTION SWITCH
MA7041
CONNECTION FOR"COMPASS"
OPERATING SYSTEM
SEAl FOR PHOTOCEll CARD
MF9011-9111
'1 "Hl~ 'UnCH)
7' ~ ~
61
","",0' , IlUUO\A
/IAA10011
CONNECTION FORELECTRIC LOCK
MA7012
B "
B "
B,
B ,
B "
EO •
B
M
B "
B "
B ,
TERMINAl BOARD FOR CONNECTION
OF ACCESSORIES
<D
POWER SUPPLY CONNECTION TERMINAL BOARD
24V Reduction gear power supply (supplied standard)
...L
Earth connection
230V Power supply (50/60 Hz)
Line fuse 2A
(see page 22)
TERMINAL BOARD FOR CONNECTION OF ACCESSORIES
@
10'
M
@
11.
10 - 11
24V a.c.ld.c. power to accessories
@
1
1
• 2
Pushbutton Stop, normally close contact (N.C.)
S
2
MAlOl:
2
- C1 Photocells, re-opening during closing (N.C.)
@
Cl
2
- Ri
Normally open contact (N.O.) for central sensor (used only
e
Ri
(![[ when interface system is installed)
S
M
2 - R1 Normally open contact (N.O.) external sensor (ean be excluded)
S
R2
2 - R2 Normally open contact (N.O.) internal sensor
@
Rl
(~
2
• M
Normally open contact (N.O.), for "step-by-step" operation
@
2
(manual bullon)
. '.l..-.'
- Contact 1-2 and 2-C1 are normally closed (N.C.) and bridged together at the factory. To use these functions, replace
the bridge connections with the relative devices.
- The 2-C1 contact is used when a security system is desired (for example, photoelectric cells or other control
devices), which is noteapable of being housed in the special clip-in seal Note if the MA9011/9111 photoelectric cell
card is not enabled or if it is enabled and you wish to disable it, set dip switch 3to ON (4-way module).
- The 2-M contact is normally open (N.O.), and has a double function:
1) During normal functioning it is enabled for opening, even if the MA7041 function selector is set on "doors closed".
This function ean be used for preferential passage, (e.g., evening closure, opening command on key or magnetic
switches).
2) By selling dip switch 5to ON (10-way module), the "stepper" opening function is enabled (by pressing the bullon
the door opens: pressing it again closes the door). Attention, by using this function contacts 2-Rl and 2-R2 are
excluded.