12
Azur DAB/FM tuner
Setting the alarm
The Alarm function will turn on the 640T V2.0 at a chosen time. It will
also generate a command on the Control Bus output that, when
connected, will turn on a compatible Cambridge Audio azur series
amplifier and cause it to select the tuner input. To set the alarm time:
1. Press
Alarm/Clock
on your remote control. ‘Alarm’ will appear on the
front panel display.
2. Use the
Skip/Scan
buttons to select if the alarm should be off, work
once, or every day.
3. Press
Alarm/Clock
to accept and progress to set the hour.
4. Use the
Skip/Scan
buttons to alter the hour.
5. Press
Alarm/Clock
to accept and progress to set the minutes.
6. Use the
Skip/Scan
buttons to alter the minute.
7. Press
Alarm/Clock
to continue to the Sleep function or press
Alarm/Clock
again to finish.
Setting the sleep time
The sleep function will turn off the 640T V2.0 at a chosen time. It will
also generate a command on the Control Bus outputs that, when
connected, will turn off a compatible Cambridge Audio Azur series
amplifier. To set the sleep time:
1. Press
Alarm/Clock
on your remote control. ‘Alarm’ will appear on the
front panel display. Press
Alarm/Clock
again ‘Sleep’ will appear on
the display.
2. Use the
Skip/Scan
buttons to alter the hour.
3. Press
Alarm/Clock
to accept and progress to set the minutes.
4. Use the
Skip/Scan
buttons to alter the minute.
5. Press
Alarm/Clock
to finish.
Note: The Sleep function will reset after it has been performed.
DAB system reset
If the 640T V2.0 is moved to another location where there are different
stations the old stations can be removed from the memory. To do a
system reset:
1. Turn the 640T V2.0 off on the rear panel. Hold down the
Select
button
whilst turning the unit back on.
2. Continue holding
Select
until ‘System Reset’ appears on the display.
OPERATING INSTRUCTIONS CONTINUED