cam SHP Series, Руководство по эксплуатации

Страница: 24 / 36

24/36
Never try to seal a leak yourself. This can cause injuries or damage to your skin and clothes.
Only qualified and authorised personnel is permitted to repair or maintain the product.
To prevent leaks, replace hydraulic hoses if needed while wearing safety gloves.
May only be done by a qualified service technician and according to the manufacturer’s instructions.
5. Check bolts and screws
Check that all the screws are properly tightened and check the lifting device attachment hooks.
In case of damage or loose bolts/screws, replace/tighten them.
Can be done by the user.
6. Lubrication
Perform a complete lubrication, grease the four points indicated in the figure below with a special
grease (REF 140TA8901 Multis Complex EP 2).
Can be done by the user.
Grease the contact area (sliding blocks).
Do not use grease containing molybdenum disulphide for lubrication.