cam SHP Series, Руководство по эксплуатации

Страница: 23 / 36

23/36
7.3. Maintenance instructions
In the event of problems or if operations are to be undertaken that are not specifically
described in this manual, consult CAM attachments or the retailer.
1. Daily maintenance check
A daily check of the sideshifter can limit wear to a minimum:
• Check the lines of the hydraulic system to avoid blockages. Provide enough space for a good
manoeuvrability.
• Make sure that the instruction manual is complete, legible and available for reference.
• Check the entire device for: damage, corrosion or cracks in structural components.
• Check the load-retaining potential.
Can be done by the user.
If damage or defects are found, first solve the problem/replace the parts before continuing to
work with the sideshifter.
2. Cleaning
Clean as needed and wipe a cloth dampened in soap solution (REF 131TA5500)* or TotalSource wipes
(REF 147TA3378). Do not use solvents, petrol, strong detergents etc.
If the equipment is heavily soiled, the use of a pressure cleaner is only permitted providing that it is set
to a maximum of 200 bar.
When you use a high-pressure cleaner, do not direct the jet onto the bearings and seals, otherwise the
grease will be washed out and the lifespan of the machine will be shortened.
Never use sandpaper or abrasive material on the sideshifter.
Can be done by the user.
* Soap solution must be diluted 5 to 10%. Use the soap solution to wash off the dirt and wipe
off the soap residue with a cloth dipped in clean water.
3. Check the hydraulic circuit
Check the hydraulic circuit for any leaks.
Never try and search for leaks or plug a leak by hand. Liquids under high pressure can easily penetrate
skin and clothing, and may cause serious injuries.
Replace any damaged hydraulic hoses to prevent them from breaking and causing any accidents.
Always replace the hydraulic hoses at least every 3 years.
Never try and search for leaks or plug a leak by hand. Liquids under high pressure can easily
penetrate skin and clothing, and may cause serious injuries.
May only be done by a qualified service technician and according to the manufacturer’s instructions.
4. Check the connections of the hydraulic system
Make sure that the hydraulic system is connected with the correct hydraulic hoses.
Check that there is no oil leakage from the pipes, fittings or cylinders.
Can be done by the user.