cam SHP Series, Руководство по эксплуатации

Страница: 21 / 36

21/36
6.2.2. Load handling
Don’t drive with a non-centred load (shifted towards the left or right).
Make sure that loads can’t move freely, they may fall and cause accidents.
1. Set the forks of your lifting device in the correct position and as wide as possible for the load to be
carried.
2. Adjust the forks to the correct width so you can provide a more even distribution.
3. Pick up the load parallel to the floor. Always use both forks if you want to transport the goods.
4. When moving your lifting device, lift the load 200 mm from the ground.
If you are using a lift truck, make sure you tilt the mast backwards.
5. To unload, firstly bring the upright to a vertical position and then slowly lower the forks.
200 mm