Calrec Apollo, Инструкция по установке и техническому обслуживанию

Страница: 95 / 124

CALREC
Putting Sound in the Picture
95
DUAL FADER PANEL - IC5717
The IC5717 is a dual fader panel,
fitted with 8 x 100mm throw faders
and a second row above of 8 x 60mm
faders.
The panel is the same physical size as
the IC5701 with some strip functionality
removed to make space for the second
row of faders. The dual fader panel gives
physical access to both A & B layers
simultaneously.
Control surfaces can be fitted with a
mixture of single and dual fader panels if
required.
As standard, the panel is fitted with
'Cut' buttons to mute fader paths. As
an option, 'On' buttons can be fitted
and the software configured for reverse
functionality - the fader path is active
when On is lit and muted when it is not.
If On buttons are required, this should be
specified at the time of order.
Connections
The additional faders require extra power
that cannot be delivered by a single POE
connection, therefore this panel has
2 x RJ45 ports. CTRL SYSTEM is the
main data and power connection from
a POE switch panel port, AUX POWER
provides the additional power required and
connects to a POE switch ancillary power
port. As with all intelligent surface control
panels, the data connection needs to be
connected to the POE switch / port as
defined by the console layout in the Main
Application.
A (NOT*) DVI connector is used to send
data to the associated up-stand TFT
screen above the fader panel, if fitted.
*Note, the connector type is DVI, but the
format is not DVI - This should not be
connected to anything other than Calrec
TFT panels, doing so may damage the
equipment.
AUX POWER TFT METER (NOT DVI)
IC5717 Serial No.
CTRL SYSTEM
CONNECTOR LAYOUT
AFL
AFL
CUT CUT CUT CUT CUT CUT CUT CUT CUT CUT CUT CUT CUT CUT CUT CUT
IC5717 - APOLLO DUAL FADER PANEL