![background image](http://html1.mh-extra.com/html/calrec/apollo/apollo_installation-and-technical-manual_3521162070.webp)
70 APOLLO
Digital Broadcast Production Console
External Control
card that the Perle will connect to. Repeat
to add the secondary Calrec card as
another host. Click
Apply
to save the
changes.
Select the
Serial>Serial Port
page.
Select port 1 and click
Edit
to view the
details for the serial port. At the top of the
page, below the port label, click
Change
to select the
TCP sockets profile
, click
Apply
and then
Return to Serial 1
.
Select the
Hardware
tab and enter serial
port settings that match that of the 3rd
party controller. Common settings are;
Serial Interface: EIA-232, Speed:
115200, Data Bits: 8, Parity: Odd, Stop
Bits: 1, Flow Control: None
. Click
Apply
.
If a backup controller serial connection
is being used, repeat the above for serial
port 2.
Select the
General
tab for serial port
1. Check
Connect To
, and select the
primary Calrec card from the
Host
drop-
down list (as was previously defined from
the Network>Advanced page). Enter a
TCP Port
number to match the protocol
being setup (61000 for SW-P-08, 62000
for EMBER. The CSCP port is selectable,
as defined by Calrec StudioSetup, the
default value being 49200).
Select
Initiate Connection
Automatically
, and check
Send Name
On Connect
.
If Ethernet cable and port redundancy
is required from a single serial port
controller, check
Connect To Multiple
Hosts
, then click
Define Additional
Hosts
. Click
Add
and select the Calrec
secondary card from the Host list, and
enter the TCP port number required
for the protocol being used. Click
OK
.
Ensure that
Define primary and backup
Once completed, click Reboot IOLAN
or cycle the power to the unit for the
configuration changes to take.
PERLE WEB MANAGER - NETWORK>IP ADDRESS PAGE
PERLE WEB MANAGER - NETWORK>ADVANCED PAGE
hosts to connect to
is
NOT
selected,
and then
Apply
.
If there is a backup 3rd party controller
serial connection, do not select serial port
1 to connect to multiple hosts. Instead,
Configure serial port 2 to connect to the
Calrec secondary card.
192.168.1.10
192.168.2.10
192.168.1.10
255.255.0.0
255.255.0.0
192.168.1.0
192.168.2.0
192.168.1.10
Содержание Apollo
