Calix GigaSpire BLAST u12 GS202xE, Руководство по установке

Страница: 38 / 41

38
Proprietary Information: Not for use or disclosure except by written agreement with Calix.
.
Power-up Status Function LED Status
Alexa Notifications
Queued
Alexa Notifications have arrived but
have not be requested by the user.
Continuous slow pulse until notifications
are picked up. This state continues
unless a temporary interruption by a
regular Alexa listen/think/respond
interaction is requested.
Returns to GigaSpire LED status once
all notifications have been picked up.
Note: All four LED's affected
Note: Toggles for 1.26 seconds
between yellow and off.
Alexa Do Not Disturb
Alexa DND has been provisioned
(Enable DND, Disable DND)
Note: All four LED's affected
Note: Toggles for 1.26 seconds
GigaMesh LED Behavior
WPS is enabled upon pressing the WPS button a single time. After pressing the button, the
GS202xE will stay in pairing mode for 120 seconds.
During this time, other Wi-Fi capable devices can be paired to the GS202xE Gateway Wi-Fi
radios (5 GHz band) by initializing a similar WPS function on the other GS202xE or
GM1020 mesh satellite thereby creating an association with the Gateway SSID and the mesh
satellite. When the Gateway and the mesh satellite are successfully paired, they will have the
same primary SSID (2.4 and 5 GHz).
Sequence of WPS operation
1.
Press WPS button a single time (3+ seconds in a 10-second window, according to Calix
SW convention).
2.
GS202xE Gateway enters pairing mode (up to 120 seconds).
3.
If another device is found, the GS202xE pairs with the device.
4.
If no device is found, the GS202xE will exit pairing mode after 120 second.
Note: Backhaul pairing can be initiated by:

Pressing the WPS button for at least 3 seconds
 Selecting the WPS button in the GUI

Initiating a WPS pairing session via the Mobile Application.
Note : WPS LED behavior takes priority even if Alexa is in use during the pairing period.
Note: GM1020 GigaMesh uses a dual LED array.