Calix GigaSpire BLAST u12 GS202xE, Руководство по установке

Страница: 34 / 41

34
Proprietary Information: Not for use or disclosure except by written agreement with Calix.
.
Power-up Status Function LED Status
Connected to
Internet
Unit has successfully booted up, local
services are up, and connected to the
Internet.
Note: LED 1 is lit, LED 2,3,4 are Off
Service Failure, No
Internet
No service, no Internet.
Note: All four LEDs on.
Notes: Cycles at 1.6 seconds
Alexa has been
triggered, Alexa is
listening
Alexa is listening and active. Listing
once the trigger word is heard.
Note: All four LED's on.
Note: Cyan on continuously.
LED States - WPS Functionality
WPS is enabled upon pressing the WPS button a single time. Pushing the button 3 times
within 10 seconds activates WPS for the IPTV SSID.
After pressing the button, the WPS feature will stay in pairing mode for 120 seconds.
During this time, other Wi-Fi capable devices can be paired to the Gateways Wi-Fi radios (5
GHz band) by initializing a similar WPS function on the other device or mesh satellite
thereby creating an association with the Gateway SSID and the mesh satellite. When the
Gateway and the mesh satellite are successfully paired, they will have the same primary SSID
(2.4 and 5 GHz).
Sequence of WPS operation
1.
Press WPS button a single time (3+ seconds in a 10-second window, according to Calix
SW convention).
2.
GS202xE Gateway enters pairing mode (up to 120 seconds).
3.
If another device is found, the GS202xE pairs with the device.
4.
If no device is found, the GS202xE will exit pairing mode after 120 second.
Note : WPS LED behavior takes priority even if Alexa is in use during the pairing period.