Calix GigaSpire BLAST u12 GS202xE, Руководство по установке

Страница: 36 / 41

36
Proprietary Information: Not for use or disclosure except by written agreement with Calix.
.
Power-up Status Function LED Appearance LED Status
Gateway Not Found
If no device is found after the initial 120
second time-out, the WPS/Strength
LED bar shifts from the blinking green
to solid red.
LED bar remains red for another 60
seconds, then reverts to the "No
Internet failure status.
After pairing,
monitor gateway
status
After pairing is complete (60 seconds
after the signal strength has been
displayed), the light bar indicates the
gateway status as being on-line.
If the Mesh is connected via WIRED
Ethernet and if boot-up was successful,
the light bar indicates the actual
gateway status (single top LED is lit).
Refer to LED Stats - GigaSpire Turn-up
(on page 32 ) for additional information
LED States - Miscellaneous Controls
Additional LED States
Alexa Status Function
LED
Status
Alexa
System/Configuration
Change
Alexa status is change (perhaps a changing
of the Wake word from within the Alexa App).
Note: All four LED's on.
Note: Toggles off and on every 1.26 seconds
until update is complete. Returns to GigaSpire
behavior when done.
Alexa System Alarm
Alexa is not functional. Alarm status is
triggered after:

The Wake word is uttered and there is no
response from Alexa Cloud

The local Internet connection has been
lost.
Note: All four LED's on.
Note: Toggles three times only at .62 seconds
before returning to GigaSpire LED status.
Mute Microphone
Applies to the square LED on the top of the
2026E GigaSpire.
Default position is microphone on. (LED Off)
Pressing the Mute microphone icon causes
the LED to illuminate solid red.
Note: The functionality of the top LED is
hardware controlled.
See Below