An exit loop is a device that opens the gate automatically when a car approaches the gate.
A reverse loop is a loop that reverses the direction of a closing gate if a car drives over it. It will also hold the
gate open if a vehicle stops over the loop. If the gate is fully closed and a vehicle drives over it, the gate will
not open.
A phantom loop is a reverse loop located inside the property.
NOTICE - WE DO NOT RECOMEND USING TIMER (AUTO-CLOSE) FEATURE UNLESS YOU HAVE
VEHICLE LOOP DETECTORS AND WIRELESS EDGE SENSOR INSTALLED. CALIMET IS NOT LIABLE
TO ANY DAMAGES CAUSE BY USING TIMER (AUTO-CLOSE) FEATURE WITHOUT A VEHICLE LOOP
DETECTORS AND WIRELESS EDGE SENSOR.
VEHICLE LOOP DETECTORS
CM9-2 INSTALL ATION AND OWNER MANUAL V.3.1 | 2023.06.01
PAGE 27
REVERSE LOOP
4’ X 8’ (3 LAYERS)
REVERSE LOOP
(PHANTOM)
4’ X 8’ (3 LAYERS)
EXIT LOOP
4’ X 8’ (3 LAYERS)
4’
4’
4’ - 8’
