calimax Solida PR 08 02 01, Руководство по эксплуатации

Страница: 34 / 36

Page 34
Overview of error messages
After a malfunction has been resolved, the display must be acknowledged by press-
ing the Start button.
Error number Designation Description
HTS HT switch or pressure monitor
triggered
Clean burn grate/heat exchanger
Reduce fuel quantity, clean chimney
and connection piece
Increase convection air fan capacity
Maximum PCB temperature Clean burn grate/heat exchanger
Reduce fuel quantity
Ignition error/Lack of mate-
rial Flue gas temperature not reached by
end of delay time
Fill with pellets
Remove unburnt pellets from burn grate!
Lack of material Flue gas temperature falling during heat-
ing phase
Fill with pellets
SD card error Replace or reformat SD card
(FAT or FAT32
)
EEPROM error Replace control system
Userware runtime error Replace control system
Firmware runtime error Replace control system
CA or room sensor inter-
rupted Check whether sensor inserted
Replace sensor
Inform service technician