California Instruments BPS Series, Руководство пользователя

Страница: 23 / 153

AMETEK Programmable Power
BPS Series User Manual M440077-01 Rev A 23
3. Unpacking and Installation – BPS30 and BPS45 Models.
CAUTION: There are two basic hardware configuration models of the BPS Series power source
with different hookup instructions. Verify that the model being installed is one of the models
indicated above. See section 3.0 for BPS75, BPS90, BPS150 and BPS180 versions.
3.1 Unpacking
Inspect the unit for any possible shipping damage immediately upon receipt. If damage is evident, notify
the carrier.
DO NOT return an instrument to the factory without prior approval. Do not destroy the
packing container until the unit has been inspected for damage in shipment. If possible, retain the
container (wooden crate) in the event the system ever has to be returned to the factory for either repair or
upgrades
WARNING: This version power source weighs approximately 2150 lbs /
975 Kg
approximately
2475 lbs / 1123 Kg
. Obtain adequate help when moving the unit. Make sure
the location (floor) in which the BPS Series unit will be installed can support the weight of the
unit.
3.2 Power Requirements
The BPS Series power Source has been designed to operate from a three-phase, three wire (Wye or Delta)
AC input line. A protective earth connection is required as well. (PE).
Available three-phase input settings are 208 V
LL
(option -208), 230 V
LL
(option -230), 400 V
LL
(option -
400), or 480 V
LL
(option -480).
Figure 3-1: The BPS30 or BPS45 Power Source
CAUTION: Do not connect 400 or 480V into a unit set for 208 or 230V unit, the result could be a
severely damaged unit. Always check the input rating on the model number tag before connecting
AC input power. Consult factory if input settings have to be changed.