CALIFORNIA ACCENT LIGHTING, INC.
2034 E. Lincoln Ave. #431, Anaheim, CA 92806
ph. 800.921.CALI (2254) or 714.535-7900 \ fx. 714.535.7902
[email protected] \ calilighting.com
© CALI. All rights reserved. CALI reserves the right to make changes or withdraw specifications without prior notice.
Installation Instructions
lip
LEDs
™
LLED
8600-RME
13 of 21
Setup of Controller: Hardwire (DMX-RGBW-1024C)
2.
Cut one end of RJ45 cable near the connector and strip blue jacket, exposing about 1” of
internal wiring. Connect the other end of RJ45 cable to the DMX input port on
DMX-RGBW-3A. Refer to wiring diagram on page 6 for additional details.
1.
Unbox DMX controller components. You will need the DMX controller, power connector,
USB cable, and RJ45 ethernet cable.
1 2 3 4 5 6 7 8
1: Orange / White
2: Orange
3: Green / White
4: Blue
5: Blue / White
6: Green
7: Brown / White
8: Brown
Dark Red
(Positive)
Blue
(Neutral)
To 120V
Power Source
Power
DC+
Power
Ground
DMX
Ground
DMX
-
DMX
+
White / Brown
(DMX Ground)
Orange
(DMX -)
White / Orange
(DMX +)
White / Brown
(DMX Ground)
Power
DC+
Power
Ground
DMX
Ground
DMX
-
DMX
+
Orange
(DMX -)
Black / White
(Ground)
Black
(DC +)
White / Orange
(DMX +)
Next Scene
Standby
Next Area
Scene
Speed
Previous Scene
Previous Area
Dimmer
Undo / Select
Color
AC Adapter
Connector
Block
Power
Plug
1 2 3 4 5 6 7 8
1: Orange / White
2: Orange
3: Green / White
4: Blue
5: Blue / White
6: Green
7: Brown / White
8: Brown
Dark Red
(Positive)
Blue
(Neutral)
To 120V
Power Source
Power
DC+
Power
Ground
DMX
Ground
DMX
-
DMX
+
White / Brown
(DMX Ground)
Orange
(DMX -)
White / Orange
(DMX +)
White / Brown
(DMX Ground)
Power
DC+
Power
Ground
DMX
Ground
DMX
-
DMX
+
Orange
(DMX -)
Black / White
(Ground)
Black
(DC +)
White / Orange
(DMX +)
Next Scene
Standby
Next Area
Scene
Speed
Previous Scene
Previous Area
Dimmer
Undo / Select
Color
AC Adapter
Connector
Block
Power
Plug
1 2 3 4 5 6 7 8
1: Orange / White
2: Orange
3: Green / White
4: Blue
5: Blue / White
6: Green
7: Brown / White
8: Brown
Dark Red
(Positive)
Blue
(Neutral)
To 120V
Power Source
Power
DC+
Power
Ground
DMX
Ground
DMX
-
DMX
+
White / Brown
(DMX Ground)
Orange
(DMX -)
White / Orange
(DMX +)
White / Brown
(DMX Ground)
Power
DC+
Power
Ground
DMX
Ground
DMX
-
DMX
+
Orange
(DMX -)
Black / White
(Ground)
Black
(DC +)
White / Orange
(DMX +)
Next Scene
Standby
Next Area
Scene
Speed
Previous Scene
Previous Area
Dimmer
Undo / Select
Color
AC Adapter
Connector
Block
Power
Plug
1 2 3 4 5 6 7 8
1: Orange / White
2: Orange
3: Green / White
4: Blue
5: Blue / White
6: Green
7: Brown / White
8: Brown
Dark Red
(Positive)
Blue
(Neutral)
To 120V
Power Source
Power
DC+
Power
Ground
DMX
Ground
DMX
-
DMX
+
White / Brown
(DMX Ground)
Orange
(DMX -)
White / Orange
(DMX +)
White / Brown
(DMX Ground)
Power
DC+
Power
Ground
DMX
Ground
DMX
-
DMX
+
Orange
(DMX -)
Black / White
(Ground)
Black
(DC +)
White / Orange
(DMX +)
Next Scene
Standby
Next Area
Scene
Speed
Previous Scene
Previous Area
Dimmer
Undo / Select
Color
AC Adapter
Connector
Block
Power
Plug
Power Connector
1 2 3 4 5 6 7 8
1: Orange / White
2: Orange
3: Green / White
4: Blue
5: Blue / White
6: Green
7: Brown / White
8: Brown
Dark Red
(Positive)
Blue
(Neutral)
To 120V
Power Source
Power
DC+
Power
Ground
DMX
Ground
DMX
-
DMX
+
White / Brown
(DMX Ground)
Orange
(DMX -)
White / Orange
(DMX +)
White / Brown
(DMX Ground)
Power
DC+
Power
Ground
DMX
Ground
DMX
-
DMX
+
Orange
(DMX -)
Black / White
(Ground)
Black
(DC +)
White / Orange
(DMX +)
Next Scene
Standby
Next Area
Scene
Speed
Previous Scene
Previous Area
Dimmer
Undo / Select
Color
AC Adapter
Connector
Block
Power
Plug
RJ45 Cable
(Ethernet B Connection)
1 2 3 4 5 6 7 8
1: Orange / White
2: Orange
3: Green / White
4: Blue
5: Blue / White
6: Green
7: Brown / White
8: Brown
Dark Red
(Positive)
Blue
(Neutral)
To 120V
Power Source
Power
DC+
Power
Ground
DMX
Ground
DMX
-
DMX
+
White / Brown
(DMX Ground)
Orange
(DMX -)
White / Orange
(DMX +)
White / Brown
(DMX Ground)
Power
DC+
Power
Ground
DMX
Ground
DMX
-
DMX
+
Orange
(DMX -)
Black / White
(Ground)
Black
(DC +)
White / Orange
(DMX +)
Next Scene
Standby
Next Area
Scene
Speed
Previous Scene
Previous Area
Dimmer
Undo / Select
Color
AC Adapter
Connector
Block
Power
Plug
DMX Controller
(#DMX-RGBW-1024C)
5.
Install Nicolaudie Easy Stand Alone software. Use provided software disc or go to
https://www.nicolaudie.com/en/esa.htm to download software and software manual.
6.
Connect controller via USB cable to a computer with Nicolaudie software installed, then
program scenes into controller as desired. Remove USB cable after programming is complete.
Note:
See page 15 - 16 for a guide on creating and saving customized scenes.
3.
Connect 12VDC output wires from AC adapter to connector block. Connect the black / white
wire to Power DC+ and the black wire to PowerGround. Connect the brown / white wire to
DMX Ground, the orange wire to DMX-, and the orange / white wire to DMX+ in the
connector block. Cap off the five remaining wires.
7.
Mount an electrical box (not included, by others) into the wall where controller will be mounted.
12.
Remove back plate from front panel. Slide back plate towards the bottom of the controller
to disengage the slide lock, then gently remove back plate from front panel. Route wiring
from electrical box through the large hole in the back plate of controller.
1 2 3 4 5 6 7 8
1: Orange / White
2: Orange
3: Green / White
4: Blue
5: Blue / White
6: Green
7: Brown / White
8: Brown
Dark Red
(Positive)
Blue
(Neutral)
To 120V
Power Source
Power
DC+
Power
Ground
DMX
Ground
DMX
-
DMX
+
White / Brown
(DMX Ground)
Orange
(DMX -)
White / Orange
(DMX +)
White / Brown
(DMX Ground)
Power
DC+
Power
Ground
DMX
Ground
DMX
-
DMX
+
Orange
(DMX -)
Black / White
(Ground)
Black
(DC +)
White / Orange
(DMX +)
Next Scene
Standby
Next Area
Scene
Speed
Previous Scene
Previous Area
Dimmer
Undo / Select
Color
AC Adapter
Connector
Block
Power
Plug
Slide lock
Slide lock
8.
Insert assembled connector block into the receiving port on the back of controller.
11.
Download DMX Lightpad 3 or Easy Remote to a mobile device and connect the device to
the same network. The app will automatically detect the controller.
10.
Confirm the controller is connected to the network by holding the standby button for
3 seconds until menu appears on screen. Use the arrow buttons to toggle through the menu
to Ethernet section. Press the middle “stick” button on the controller to select choice.
Toggle through the menu until either DHCP Success or DHCP Fail appears. If DHCP Fail
appears, the controller is likely being blocked by a firewall.
13.
Mount controller interface onto the electrical box. Secure with at least two screws, then attach
the front panel onto the back plate. Wait at least 30 seconds for the touch sensitivity to adjust.
4.
Connect power plug to standard 120V outlet.
9.
To connect controller to a network, connect one end of an RJ45 Ethernet cable to the
Ethernet port on the controller (bottom port). Connect the other end of the cable to a router
or switch. The controller should connect to the network automatically.
1 2 3 4 5 6 7 8
1: Orange / White
2: Orange
3: Green / White
4: Blue
5: Blue / White
6: Green
7: Brown / White
8: Brown
Dark Red
(Positive)
Blue
(Neutral)
To 120V
Power Source
Power
DC+
Power
Ground
DMX
Ground
DMX
-
DMX
+
White / Brown
(DMX Ground)
Orange
(DMX -)
White / Orange
(DMX +)
White / Brown
(DMX Ground)
Power
DC+
Power
Ground
DMX
Ground
DMX
-
DMX
+
Orange
(DMX -)
Black / White
(Ground)
Black
(DC +)
White / Orange
(DMX +)
Next Scene
Standby
Next Area
Scene
Speed
Previous Scene
Previous Area
Dimmer
Undo / Select
Color
AC Adapter
Connector
Block
Power
Plug
