California Accent Lighting lipLEDs LLED8600-RME Скачать руководство пользователя страница 19 | Manualshive

Страница: 19 / 21

background image

CALIFORNIA ACCENT LIGHTING, INC.

2034 E. Lincoln Ave. #431, Anaheim, CA 92806

ph. 800.921.CALI (2254) or 714.535-7900 \ fx. 714.535.7902

[email protected] \ calilighting.com

© CALI. All rights reserved. CALI reserves the right to make changes or withdraw specifications without prior notice.

Installation Instructions

lip

LEDs

™

LLED

8600-RME

19 of 21

Troubleshooting

TROUBLESHOOT

• Do not reset breaker multiple times.
• If the unit is overloaded the breaker will trip, shutting off the

  transformer and lights.
•   If the breaker reset button has been held down by hand or any type
  of pressure (example: duct tape), or if the breaker has been reset
  multiple times without troubleshooting, the unit will:
   - Burn the transformer bobbin
   - Burn the thermal or magnetic breaker
   - Burn the primary or secondary wires due to high amperage caused
    by overload and/ or short circuit in line which will not allow the
     breaker to reset
   - Damage the lighting

1.

Turn off power before beginning. Check for any twisting or damage to

the circuit in the LED lightstrip. If there is excessive damage and
circuit is broken, the lightstrip must be replaced.

2.

Check for metal particles or other foreign objects causing the short.

3.

Check if cut is clean and not frayed, causing positive and negative

copper pads to touch.

4.

Ensure the run is not too long and overlapping.

5.

Ensure copper pads are not making contact with aluminum extrusion.

6.

Check wiring diagram.

7.

Reset power to controller.

Frayed end

Copper pads touching extrusion

Foreign object

Lightstrip overlapping extrusion

Metal flakes

Damaged lightstrip

Twisted lightstrip

Torn lightstrip

Frayed end

Copper pads touching extrusion

Foreign object

Lightstrip overlapping extrusion

Metal flakes

Damaged lightstrip

Twisted lightstrip

Torn lightstrip

Frayed end

Copper pads touching extrusion

Foreign object

Lightstrip overlapping extrusion

Metal flakes

Damaged lightstrip

Twisted lightstrip

Torn lightstrip

Frayed end

Copper pads touching extrusion

Foreign object

Lightstrip overlapping extrusion

Metal flakes

Damaged lightstrip

Twisted lightstrip

Torn lightstrip

Frayed end

Copper pads touching extrusion

Foreign object

Lightstrip overlapping extrusion

Metal flakes

Damaged lightstrip

Twisted lightstrip

Torn lightstrip

Frayed end

Copper pads touching extrusion

Foreign object

Lightstrip overlapping extrusion

Metal flakes

Damaged lightstrip

Twisted lightstrip

Torn lightstrip

«
...
17
18
19
20
21
»

Содержание lipLEDs LLED8600-RME






















Отзывы:

Нет отзывов

Похожие инструкции для lipLEDs LLED8600-RME

BTL PA0400 Series

Бренд: Balluff Страницы: 22

Micropulse BTL5 Series

Бренд: Balluff Страницы: 12

BNI IOW-560-W01-K022

Бренд: Balluff Страницы: 32

Бренд: Baltic Страницы: 68

Бренд: Baltic Страницы: 68

Max Charge MC-612

Бренд: Balmar Страницы: 12

BTL PA0400 Series

Бренд: Balluff Страницы: 204

Бренд: Echo Страницы: 6

Pro Attachment Series

Бренд: Echo Страницы: 28

Бренд: Echo Страницы: 2

Pro Vantage 12+ Series

Бренд: Ecco Страницы: 6

Бренд: HABYS Страницы: 16

Бренд: Raven Страницы: 48

Бренд: Pacific Страницы: 16

Бренд: Mach Страницы: 12

Бренд: Zell Страницы: 32

Бренд: Uflex Страницы: 16

Air 2000 Outdoor

Бренд: ubbink Страницы: 21

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды