Manufactured in the U.S.A.
alum
LEDs
™
CALIFORNIA ACCENT LIGHTING, INC.
2820 E. Gretta Lane, Anaheim, CA 92806
ph. 800.921.CALI (2254) | fx. 714.535.7902 | [email protected] | calilighting.com
© CALI. All rights reserved. CALI reserves the right to make changes or withdraw specifications without prior notice.
Page 8 of 11
INSTALLATION
ALS
600T-AD
2019.12.5 Rev 2
Operating the Pivot Function
1.
Slightly unscrew Pivot Lock Knobs on both ends of fixture until Pivot Lock Bar and Upper
Extrusion move freely. Do not remove Pivot Lock Knob.
2.
Adjust as needed. Use Angle Finder Markings on end caps to achieve desired angle.
Tip:
Use an angle finder or sliding bevel to ensure accuracy of angles.
3.
Turn the Pivot Lock Knob until tight against Pivot Lock Bar. Repeat on other end of fixture.
Do not overtighten Pivot Lock Knob.
Turn knob to tighten
DIAGRAM OF ASSEMBLY
Angle Finder Markings
Lower Extrusion
Upper Extrusion
Pivot Lock Bar
Pivot Lock Knob
Turn knob to loosen
