Manufactured in the U.S.A.
alum
LEDs
™
CALIFORNIA ACCENT LIGHTING, INC.
2820 E. Gretta Lane, Anaheim, CA 92806
ph. 800.921.CALI (2254) | fx. 714.535.7902 | [email protected] | calilighting.com
© CALI. All rights reserved. CALI reserves the right to make changes or withdraw specifications without prior notice.
Page 11 of 11
INSTALLATION
ALS
600T-AD
2019.12.5 Rev 2
Surge Protector
1.0” 1.52”
.26”
.26”
.25”
ø 1.14”
.41”
2.91”
1.91”
1.16”
.09”
.58”
LED Lighting
0-10V Dimming
ALS-SP
TRA-E Power Source
120V-277V
V+
Hot
Ground (Green)
V-
Neutral
Hot (Black)
V-
Neutral (White)
Ground (Green)
V+
LED Lighting
TRA Power Source
120V-24VDC
Forward Phase
Dimming
ALS-SP
Line
V- (Blue)
V+ (Red)
Hot (Black)
Neutral (White)
Ground (Green)
Black (Hot)
Neutral (White)
Ground (Green)
LED Lighting
Forward Phase
Dimming
ALS-SP
Line
V- (Blue)
V+ (Red)
277V (Orange)
Neutral (White)
Ground (Green)
Hot (Black)
Neutral (White)
Ground (Green)
TRA Power Source
277V-24VDC
SURGE PROTECTOR SPECIFICATIONS
MODEL
INPUT VOLTAGE
SURGE PROTECTION LEVEL
MOUNTING
ENCLOSURE MATERIAL
INPUT LEADS
INPUT
FREQUENCY
ALS-SP
120V - 277V
10kV, 10kA, ANSI C62.41 Category C
SnapLOCK / Footed
Polycarbonate
6”, 18AWG stranded, 105°C stripped, 3/8” tinned
60Hz
PRODUCT FEATURES
The Surge Series are 3-leaded devices that protect Line-Ground, Line-Neutral, and Neutral-
Ground in accordance with IEEE / ANSI C62.41.2 guidelines. Protects against surges according
to IE EE C62.41.2 C High (10kA and 10kV). Surge current rating = 10,000 Amps using industry
standard 8/20 µSec wave. Surge Location Rated Category C3. UL Recognized Component in the
United States and Canada (UL1449). Type 4 Surge Protection Device. High temperature, flame
retardant plastic enclosure, 85°C maximum surface temperature rating. Thermally Protected
Transient Over-voltage Circuit.
PRODUCT SPECIFICATIONS
The Surge series of products are designed to be used in conjunction with LED Drivers and
fixtures to provide an additional level of protection against powerline disturbances in industrial,
commercial and residential applications where surge protection to IEEE C62.41.2 is required.
0-10V WIRING DIAGRAM (10V Dimming)
120V WIRING DIAGRAM (Forward Phase Dimming)
277V WIRING DIAGRAM (Forward Phase Dimming)
CASE DIMENSIONS
Note:
Wire colors vary based on model. See individual TRA-E submittal for more information, or refer to
wire callouts on transformer labeling. Always confirm wire colors before connecting to power source.
