8
9
Log
The device, through the optional data transmission board CS179 (code 600001) system allows recording the flow temperature, return temperature,
alarms and functional statuses, useful for monitoring the operation status of the device. It will then be possible to export the data from the device
through a PC interface. In addition, there is a failed disinfection menu on the device (the last 10 disinfections that have not been completed correctly
are stored).
General menu
The device operation is based on an internal clock with calendar and automatic time adjustment. Navigating through appropriate menus, using the
knob, it is possible to configure the device. Whatever status the appliance is in, it is always possible to navigate around the various menus to read and
change the various settings. The general menu structure is as follows:
Display menu
Press the knob and at its release the menu
of the display showing the data with which
the device works, is displayed.
Alarms sub-menu
Installer Menu
LEVEL 1
Programming Menu
Holding down the knob for 5 seconds, at its
release, the menu is displayed. When the
following screen is displayed, confirming,
the programming menu is displayed.
STOP disinfection/thermal shock
Holding down the knob for 10 seconds, at
its release, in case of disinfection and/or
thermal shock in progress, the emergency
interruption menu is accessed.
IMPORTANT: From each screen, it is possible to return to the previous level holding down the knob for 5 seconds and releasing it.
LEVEL 0
LEVEL 2
LEVEL 3
