Display
Menu:
During the operation of the device, it is possible to enter the "Display
Menu" at any time pressing the knob and turning it clockwise or
counterclockwise to navigate within the menu.
Alarms
Sub-menu.
From this
menu it is possible to display the
alarm code, if this is active or with
history value, and the number of
times it occurred (See page 13).
Clear the log using the "Reset
alarms" control.
Time format set:
12H or 24H
Disinfection type set (and related
ECO function enable).
Minimum disinfection temperature
set.
Disinfection start date and
time. A screen for the day set is
displayed (the segment below
the number indicates its activation).
Maximum time within which it is
possible to perform the disinfection.
Maximum flow temperature limit: it
is a system protection.
Temperature value measured by
probe T2.
Display of six time bands that
can be set for recirculation (OUT2
activation)
1-02:00 and 05:59 4-14:00 and 17:59
2-06:00 and 09:59 5-18:00 and 21:59
3-10:00 and 13:59 6-22:00 and 01.59
Date and time set.
Number that identifies the product
among those connected to the
BUS.
Appliance production batch and
serial number.
Log of the last 10 failed
disinfections. From this menu it is
possible to display the date and
time of the last failed disinfections.
Firmware, Software and Checksum
version.
Exit from "Display Menu"
10
