Calder Brothers Mauldin Precision Spray, Руководство владельца/оператора и каталог запасных частей

Страница: 7 / 87

Some photographs in this manual may show Doors, Guards and Shields open or removed
for illustration purposes ONLY. BE SURE that all Doors, Guards, and Shields are in
their proper operating positions BEFORE starting the Engine to operate the unit.
The operator MUST know the capabilities and work applications for the machine, and
operate it at speeds slow enough to insure complete control at all times. When working
on slopes or near drop offs, use good judgment. ONLY operators with sufficient
experience should attempt such work.
Be alert and avoid loose or soft surface conditions that could cause sudden tipping or loss
of control. Avoid side hill travel wherever possible by driving up or down the slope. In
case of slippage on grade, turn the machine IMMEDIATELY down hill. Keep the blade
crossways and lowered for extra stability when scarifying across slopes.
Operating in virgin terrain (called pioneering) is especially dangerous. Be sure you know
how this is done. Avoid falling branches, trees, and up-turning roots, and do not drive
onto brush piles, logs, or large rocks.
IF YOU ARE NOT CAREFUL WHILE OPERATING THIS MACHINE, ANY OF THE
ABOVE FACTORS COULD CAUSE THE MACHINE TO TIP AND THROW YOU
OUT OF THE OPERATOR’S STATION, WHICH MAY CAUSE SERIOUS BODILY
INJURY OR DEATH!
ALWAYS wear your seat belt!
ALWAYS keep hands, feet, and arms inside of the Operator’s Station when operating the
machine!
ALWAYS wear appropriate personal safety gear as called for by the job or working
conditions!
ALWAYS be aware of pinch point areas on the machine such as Wheels to Frame,
Cylinders to Frame!
ALWAYS maintain a safe distance from electric power lines or buried cables, and avoid
any electrically charged conductor! Contact can result in electrocution. Call your proper
local authorities for utility line locations BEFORE starting a job!
ALWAYS check the job site for terrain hazards, obstructions and bystanders!
NEVER by-pass the Starter Key Switch when starting the Engine. ALWAYS use the
jump-starting procedure detailed in the Service chapter!
Calder Brothers Corporation
Model: Precision Spray
Serial #
944-N-P2C---S-D00000 to Current
Page7
V2.2