Calder Brothers Mauldin Precision Spray, Руководство владельца/оператора и каталог запасных частей

Страница: 43 / 87

UNLOADING WITH RAMPS
OTE N
A matched pair of ramps is required.
Use ramps as described in Steps 1 thru 4 in LOADING USING RAMPS.
5. emove the chains and chain binders.
Section D - Operations, of
7. onnel from the ramp area.
e so that the wheels are in line and
OTE
Then proceed as follows to unload the machine:
R
6. Start the Engine according to Startup in
this manual.
Clear all pers
8 Disengage the Parking Brake.
9. If necessary, adjust the machin
centered with the ramps. Slowly (at the lowest Engine speed
possible) and carefully drive the machine down the ramps.
N
ng and unloading should be done in Low gear
THEFT DETERRENTS
All loadi
HE CERTAINTY OF APPREHENSION IS A STRONG DETERRENT TO THEFT
e
1. emove keys from unattended machines.
nd anti-theft devices
3. s when NOT in use.
cle storage yard. If
eck
5. r and insurance company. Provide all
6. d this same information to Calder
T
OF CONSTRUCTION EQUIPMENT! PSI has recorded all Part Numbers and Serial
Numbers. Users should take as many of the following actions as possible to discourag
theft, to aid in the recovery in the event that the machine is stolen, or to reduce
vandalism:
R
2. Attach, secure, and lock all anti-vandalism a
on the machine.
Lock doors of cab
4. Inspect the gates and fences of the vehi
possible, keep machines in well lighted areas. Ask the law
enforcement agency having jurisdiction to make frequent ch
around the storage or work sites, especially at night, during
weekends, or on holidays.
Report the theft to the deale
the model and serial numbers.
Request that your dealer forwar
Brothers Corporation.
Calder Brothers Corporation
Model: Precision Spray
Serial #
944-N-P2C---S-D00000 to Current
Page43
V2.2