Calder Brothers Mauldin Precision Spray, Руководство владельца/оператора и каталог запасных частей

Страница: 4 / 87

c. Proper clothing should be worn at all times. Long sleeved shirts and pants
are recommended. Always use safety glasses and proper gloves when
performing functions on the machine.
d. A clean work station is a safe work station. This also aids in proper visual
inspection of the machine daily, and ensures proper daily maintenance.
e. Operator shall bear the responsibility that when maintenance is complete
proper safety guards, and decals have been returned to the machine.
f. Operator shall not allow riders on the Precision Spray machine.
g. Operator shall obey all laws, seat belt included.
IV.
Hot Material Safety
a.
Operator shall always wear protective gear for face, hands, feet, eyes, and
body while working with hot bituminous products
b. Operator shall always have proper knowledge and carry in truck proper
MSDS of material on board.
c. When hot asphalt touches the skin, flush area completely according to
MSDS. Remember if you are not using emulsions, cool water may not be
the best solution. Get medical attention.
V.
Fire and Burst Explosion Safety
a.
Operator shall keep machine clear of sparks, open flames and
incandescent material. Some bitumen fumes are flammable and can
explode.
b. Operator shall never load machine when water is present in the bottom of
the tank. Hot material can cause the water to steam and burst the tank.
c. Operator shall never mix material in the tank of the distributor. Not all
asphalt products mix and problems will occur. Always contact material
handler before changing tank products to ensure compatibility or arrange
for offload of material first.
d. DO NOT SMOKE
VI.
Burner Safety
a.
Operator shall never operate the burner assemblies while truck is in
motion or being loaded.
b. Operator shall be present during entire heating cycle.
c. Operator shall be sure burner tubes are covered by a minimum of 8" of
material before burner operation. Uncovered tubes can cause explosion in
tank.
d. Operator is responsible for safe heating temperatures of the material and
not exceeding the “flash point”.
e. Operator shall begin tank circulation of material as soon as possible for
safe heating of product.
VII.
Refueling Safety
a.
Operator is responsible to keep the hose, or nozzle in contact with the tank
fill tube to prevent spark.
Calder Brothers Corporation
Model: Precision Spray
Serial #
944-N-P2C---S-D00000 to Current
Page4
V2.2