Calder Brothers Mauldin Precision Spray, Руководство владельца/оператора и каталог запасных частей

Страница: 59 / 87

Hydraulic Fluid Level (10 Hours or Daily)
CAUTION
Remove the pressure cap SLOWLY to relieve any pressure.
Always check the hydraulic fluid at operating temperature, preferably at the end
of the working day. BE SURE the machine is parked on a level surface for fluid
checks.
Stop the Engine according to the Mandatory Safety Shutdown Procedures in
Section A - Safety, of this manual.
The hydraulic Reservoir is full if the fluid is visible in the Lower Sight Gauge. If
fluid is visible in the Upper Sight Gauge, the Reservoir is OVERFILLED. Excess
fluid may be piped overboard through the Filler Cap.
NOTE
Battery (40 Hours or Weekly )
WARNING
Explosive gas is produced while a Battery is in use or being charged. Keep
flames or sparks away from the Battery area. Make sure Battery is charged in
a well ventilated area.
NEVER lay a metal object on top of a Battery. A short circuit can result.
Battery acid is harmful to skin and fabrics. If acid spills, follow these first aid
tips:
1. Immediately remove any clothing on which acid spills.
2.
If acid contacts the skin, rinse the affected area with running water
for 10 to 15 minutes.
3.
If acid comes in contact with the eyes, flood the eyes with running
water for 10 to 15 minutes. See a doctor at once. NEVER use any
medication or eye drops unless prescribed by the doctor.
Neutralize acid spilled on the floor, using one of the following mixtures:
a) 1 Pound (0.5 kg) of baking soda in 1 U.S. Gallon (4 Liters) of
water.
b) 1 Pint (0.4 Liters) of household ammonia in 1 U.S. Gallon (4
Liters) of water.
Acid from the Battery can damage the paint and metal surfaces of the machine.
Avoid overfilling the Battery cells.
Calder Brothers Corporation
Model: Precision Spray
Serial #
944-N-P2C---S-D00000 to Current
Page59
V2.2