CalAmp SMC-CDMA Series, Руководство пользователя

Страница: 43 / 62

001-0004-819 Rev01
Page 43 of 62
TCP/UDP IP Commands
A brief description of the TCP/UDP IP commands. For futher information, refer to the Motorola C24
AT Command Set document available from Motorola
[1] .
Table 10.16: TCP/UDP IP Commands
Command Description
AT+MIPCALL
This command creates a wireless PPP connection with the GGSN or CSD
service provider and returns a valid dynamic IP for the SMC modem.
AT+MIPOPEN
This command causes the SMC modem module to initialize a new
socket and open a connection with a remote side.
AT+MIPCLOSE
This command causes the SMC modem module to free the socket
accumulating buffer and disconnect the SMC modem from a remote
side.
AT+MIPSETS
This command causes the SMC modem to set a watermark in the
accumulating buffer. When the watermark is reached, data is pushed
from the accumulating buffer into the protocol stack.
AT+MIPSEND
This command causes the SMC modem to transmit the data that the
terminal provides, using an existing protocol stack.
AT+MIPPUSH
This command causes the SMC modem module to push the data
accumulated in its accumulating buffers into the protocol stack.
AT+MIPFLUSH
This command causes the SMC modem module to flush (delete) data
accumulated in its accumulating buffers.
AT+MIPRUDP
This unsolicited event is sent to the terminal when data is received from
the UDP protocol stack.
AT+MIPRTCP
This unsolicited event is sent to the terminal when data is received from
the TCP protocol stack.
AT+MIPSTAT
This unsolicited event is sent to the terminal indicating a change in link
status.
AT+MIPXOFF This unsolicited event is sent to the terminal to stop sending data.
AT+MIPXON
This unsolicited event is sent to the terminal when the SMC modem has
free memory in the accumulating buffer.
AT+MIPCONF This command allows configuring of TCP stack parameters.
AT+MPING
This command will allow verifying IP connectivity to another remote
machine (computer) by sending one or more Internet Control Message
Protocol (ICMP) Echo Request messages.
AT+MPINGSTAT
This is the unsolicited response that the SMC modem sends to the
terminal to inform of ping execution status update and provides
summary statistics of ping request when ping request execution is
completed.
AT+MSDNS This command set/read DNS IP address.
AT+MIPCFF
This command allows configuring the incoming TCP connection filtering
feature parameters, such as list of allowed IP addresses or
disabling/enabling the filtering.
AT+MIPSSL
This unsolicited event is sent to the terminal indicating an errors,
warnings or alerts that occurred during SSL connection.
AT+MIPODM
This command causes the SMC modem module to initialize a new
socket in Online Data Mode and open a connection with a remote side.
AT+MIPDATA
This unsolicited event is sent to the terminal indicating a data comes
from Network when SMC modem is in pseudo-command mode.
AT+MIPCSC
This AT command is used to configure the SSL feature behavior in case
of non - fatal alerts.
AT$QCPREV This command returns the protocol revision in use.