CalAmp SMC-CDMA Series Скачать руководство пользователя страница 34 | Manualshive

Страница: 34 / 62

background image

001-0004-819 Rev01

Page 34 of 62

Command

Description

AT+GMM

This command displays the model identification.

AT+GMR

This command displays the revision identification.

AT+GOI

Device Identification.

AT+GSN

This command requests the product serial number identification in Hex format.

AT+ICF

This command determines the Character Framing.

AT+IFC

This command controls the operation of Local Flow Control between the terminal
and the SMC modem.

AT+ILRR

TE2-MT2 Local Rate Reporting.

AT+IPR

This command is responsible for setting and saving the request baud rate.

AT+MCST

This command displays the current state of the call processing, and also
enables/disables the unsolicited indication of any change in the call processing
state.

AT+MECALL

This unsolicited report sends indication of an emergency call to the terminal.

AT+MMUX

Enable MUX mode.

AT+MPESND

Requests Pseudo Electronic Serial Number Identification in Decimal.

AT+MPESNH

Requests Pseudo Electronic Serial Number Identification in Hex.

AT+MREFLASH Enter to Re-Flash Mode.

AT+MRST

The +MRST command enables customer software to perform a hard reset to the
SMC modem cell module unit.

AT+MSCTS

This command defines the behavior of the CTS line when the SMC modem is in
normal mode (not Sleep mode).

AT+MSSI

This command enables/disables the unsolicited report for signal strength value.

AT+MTTY

This command is used to enable/disable the TTY (Tele Typewriter) support in
the SMC modem.

AT$QCCLR

This command clears the mobile error log.

A/

This command repeats the last command entered on the terminal.

AT

This command checks the AT communication and only returns OK.

ATD

This command places a voice call on the current network, when issued from an
accessory device. Note: Limited to Emergency call only.

ATE

This command defines whether input characters are echoed to output.

ATH

This command hangs up, or terminates a particular call.

ATI

This command displays various SMC modem information items.

ATQ

This command determines whether to output the result codes.

ATS[n]

These commands set/get/read the values of S-register parameters.

ATV

This command determines the response format of the data adapter and the
contents of the header and trailer transmitted with the result codes and
information responses.

ATX

This command defines the CONNECT result code format.

ATZ

This command drops the current call, and resets the values to default
configuration.

NOTE:

Products developed using the SMC-CDMA modem should allow access to the C24 cell module

AT command set via external connection from a terminal program. This will provide the cellular
carriers access to commands needed to better trouble shoot network connection issues.

«
...
32
33
34
35
36
...
»

Содержание SMC-CDMA Series































































Отзывы:

Нет отзывов

Похожие инструкции для SMC-CDMA Series

Бренд: FALCOM Страницы: 46

Бренд: Sigrand Страницы: 42

Бренд: ADC Страницы: 9

Бренд: Black Box Страницы: 2

Бренд: Aztech Страницы: 3

Бренд: Alcatel Страницы: 33

Бренд: E-Lins Страницы: 39

Бренд: Moeller Страницы: 4

Бренд: Motorola Страницы: 12

Бренд: Lava Страницы: 27

G.SHDSL .bis NTU Series

Бренд: XtendLan Страницы: 166

Бренд: MultiModem Страницы: 88

Бренд: Belkin Страницы: 2

Бренд: Zoom Страницы: 4

Бренд: Zoom Страницы: 3

Бренд: Zoom Страницы: 44

xComfort CKOZ-00/14

Бренд: Eaton Страницы: 2

Бренд: Kinpo Electronics Страницы: 23

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды