CalAmp SMC-CDMA Series Скачать руководство пользователя страница 40

Страница: 40 / 62

001-0004-819 Rev01

Page 40 of 62

Call Control Commands

The AT Commands described in this section are related to Mobile Originated (MOC, i.e. outgoing)
Calls and Mobile Terminated (MTC, i.e. incoming) Calls.

Table 10.12: Call Control Commands

Command

Description

ATD

This command places a voice call on the current network when issued
from an accessory device.

ATD>

This command places a voice/fax/data call on the current network by
dialing directly from the cell module phone book.

ATDL

This command places a voice call to the last number dialed.

ATH

This command hangs up or terminates a data call.

ATA

This command answers an incoming call placing the C24 into the
appropriate mode as indicated by the RING message

AT+MARS

This command enables the cell module to report when auto redial starts
or ends when enabled.

AT+MARD

This command enables and disables the auto-redial capability of the cell
module.

AT$QCCAV

This command answers an incoming voice call.

AT+CHV

This command hangs-up a voice call.

AT+CDV

This command dials voice calls.

AT+CRC

This command controls whether to present the extended format of the
incoming call indication.

ATO

This command returns the cell module from the Command mode to the
Online Data mode and issues a CONNECT or CONNECT <text> result
code.

+++

Escape Sequence command, switches the connection from Data mode to
Command mode.

AT+COLP

This command gets and changes the current setting of the Calling Line
Presentation.

AT+CSO

This command specifies the preferred service to be requested for the
next originated packet call.

AT+MDC

This AT command enables you to select the desired messages to be
displayed upon connection of a voice call with a remote party.

AT+MFIC

This command instructs the cell module to query or set Filtering
Incoming Calls parameters.

AT+MFOC

This command instructs the cell module to query or set Filtering
Outgoing Calls parameters.

Содержание SMC-CDMA Series































































Результаты поиска

Содержание SMC-CDMA Series

Отзывы:

Похожие инструкции для SMC-CDMA Series

Бренды по названию

Популярные бренды

CalAmp SMC-CDMA Series, Руководство пользователя

Результаты поиска

Содержание SMC-CDMA Series

Отзывы:

Похожие инструкции для SMC-CDMA Series

Бренды по названию

Популярные бренды